Radiehl: The iTC's are now receiving WAAS instead of SF1. The "Adapters" just relabel the GPS output to always show SF1 even though its actually using WAAS. Deere won't allow steering on WAAS, hence the market for the adapters. So it basically "tricks" the display into thinking it's getting SF1. Lance did a good write up on WAAS vs SF1. In short, SF1 is quite a bit better than WAAS. Is WAAS good enough for your application? If so, the adapter will work. My experience with WAAS was less than stellar. http://lefebure.com/articles/static-accuracy-testing/20100113-jditc-sf1.htm http://lefebure.com/articles/static-accuracy-testing/20100113-trimble262-waas.htm
Edited by Joe@RFDG 2/10/2021 14:07
| 
Solution for the iTC Receivers?
