|
Quebec, Canada | That’s right, you can use the Trimble monitor as a gps source for the Pro700. I’ve attached instructions on how to set the trimble monitor to output a serial gps signal. I do not know what the ideal baudrate is for the Pro700, nor do I know what settings need to be changed in the Pro700 beyond setting the gps connection type to RS232-b after plugging the DB9 plug into the back of the pro700.
Edited by Eric from Canada 2/9/2021 19:29
(45CC6291-7F79-4AED-9D45-86299DF2FF1A (full).jpeg)
(20D40A49-D3D7-41E3-AF45-C3F229505947 (full).jpeg)
Attachments ---------------- 45CC6291-7F79-4AED-9D45-86299DF2FF1A (full).jpeg (133KB - 49 downloads) 20D40A49-D3D7-41E3-AF45-C3F229505947 (full).jpeg (154KB - 42 downloads)
| |
|