|
NE CO | CAN voltages look just fine there and are well within spec. Pay no attention to the vehicle CAN as it isn't even hooked to that with this setup.
Given it is that old of a display and the hours are that low, I would imagine someone already has done a field or factory reprogram on it, if I had to guess, as doing so will reset the hours. That serial number would fall in the range like I described before of older hardware that sometimes doesn't play nice with the latest software versions. When it freezes do you ever see a pop up window saying something about win32 error?
So with that you kinda have two options then, get it repaired by Deere with a new main board, or just to try if you can, backdate the display software to version 3.25.1152 just to try out, as this is the last version before they changed some things which causes some issues with older revision displays. | |
|
2630 freezes then restarts
