|
Westport, IN | There is a USB hub in the board.
I had to look under device manager and get com ports.
Then play with baud rates.
My first board, had to use Windows 7 for Odin and Windows 10 for tbe f9p, or vise versa.
My second one the windows 10 worked for both.
Look into the baud rate of UART 1.
I have to run this connection fast. I think the UART 1 is the entire communication on the board, or at least influenced
other communications. I2C, USB, Odin, SPI, and UART 1. This would influence USB hub as well.
So to prevent bottlenecking it needs to run fast. I think 460k maybe more.
I then set UART 2 to 115k and send it to the guidance.
Edited by Rod Maker 1/21/2021 21:10
| |
|