Posted 1/4/2021 12:06 (#8721971 - in reply to #8721482) Subject: RE: F9p ublox success stories?
I have four (4) units up and running well. I have one (1) setup as a base station feeding corrections to two (2) separate rovers. Both rovers are supplying RTK to Ag Leader Versas and Ontrac 2+. I also have one (1) setup as a staking tool with corrections coming from the Indiana CORs network for a general contractor colleague. All seem to be reliable and accurate! Each of these are the sparkfun RTK2 board with the ZED F9P (https://www.sparkfun.com/products/16481). I do also have one of the C099 application boards that you have linked. I've played with it a bit but do not have it up and running in a specific application. The C099 is a better deal in my opinion vs. the sparkfun board as it comes with the onboard bluetooth, wifi, and an L1/L2 antenna. The sparkfun board is essentially the board only and requires soldering headers to begin using the ports. The C099 essentially gives you everything needed to get up and running out of the box. These would be great for a farm STEM project!