|
North Central Kansas | I’m new to this skid steer and don’t have an owners manual but getting one soon. I will confess that the hydraulic reservoir got low on oil but didn’t notice anything wrong until I tried to use a post hole digger. It ran digger fine but the lift and tilt quit when auxiliary was in use. I then discovered the low reservoir, added oil but no change. Could I have air in the system? If so how do I bleed? I’d also note that sometimes when I begin I have down pressure but no lift. After a bit I lose down pressure as well. I’m confused and frustrated. Any ideas? | |
|
445 Case Skid Steer When use aux hydraulics I lose power to bucket lift and tilt
