AgTalk Home
AgTalk Home
Search Forums | Classifieds (7) | Skins | Language
You are logged in as a guest. ( logon | register )

Help needed to connect computer to nobeam
View previous thread :: View next thread
   Forums List -> Computer TalkMessage format
 
durallymax
Posted 12/11/2020 12:47 (#8661818 - in reply to #8649348)
Subject: RE: Help needed to connect computer to nobeam


Wi
Gen 2 Nanobeam and AC Nanostation have the built in management radio that is visible on your phones Wi-Fi for 15 minutes each time the device is powered on.That option can be disabled though.

You can hook a computer directly to the LAN port of PoE injector with Nano hooked to the other. Default IP is 192.168.1.20. Disable the other networks your PC is on and cycle your network adapter if you can't connect to it. Or you can just make sure wifi is off on laptop and reboot it. As long as your LAN port is not set to anything static it should sort itself out.

Type that IP into browser, default user and pass are both ubnt. That should get you into setup.

If you bought these pre configured or changed any settings already, the above may not apply. You can do a full reset on them if you have to though and they will revert to the above settings.

When you are in the air OS app you can see the signal strength for tuning.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)