| wind tower - 12/1/2020 07:20
Little fellas is a tough one no gloves.
That will hold moose !
I like your coping do you cut them with a saw or plasma, do you use a jig?
I just can’t seem to master coping drill stem.
Send pictures of the side view of fence .
Thanks.
He is pretty tough. It may have been hardly freezing and he may have just got up from a nap though also.
I just cut with the saw freehand. I just take a 3/4” bevel off each side at a ~30* angle or so. It may not be perfect every time but close enough and I’m pretty good at filling gaps with 7018. I could snap a pic of the coped pipe when I build some more braces in a couple days.
Here’s a pic of the page wire I was stapling today. Still needs a barbed wire on top.
Edited by Alberta Cowman 12/1/2020 19:26
(DCA3377C-328C-4B4E-83BC-C495E2A88D92 (full).jpeg)
Attachments ---------------- DCA3377C-328C-4B4E-83BC-C495E2A88D92 (full).jpeg (228KB - 10 downloads)
|