The Internet | Bdairy - 11/30/2020 18:25 I’ve built a couple from old gravel trucks-cut em off and build hitch. I use an orbit motor to drive the truck pump and a small cylinder to run the valve. That way it doesn’t take a bunch of oil out of your tractor when you raise it and you aren’t putting too much pressure to the cylinder. ??????? I've been pulling and tipping trailers with farm tractors for over 30 years. There has been many times, pre DynaVT Massey, where I've had to top the oil up to fully tip the trailer and there has been zero problems because of this. There has been times when the trailer has been over loaded and it needed rocking to tip, we've even had to put pallet forks under the bodies now and again to get them to tip. This has caused no issues. I have done thousand and thousands of miles and move thousands of tonnes of grain, silage, sugar beet, scrap, earth, rubble, manure, all sorts. |