|
| Our s78 has a topcon with a c2100 screen and factory agleader integra. We are losing power to the topcon. It works for a few minutes then drops. It seems to be like a relay getting hot and cutting out then when you shut the machine down and restart it it will work for a few minutes again. I plan on looking over the harness to check for any visible problems but has anybody else had this issue and found the fix for it or have an idea of what it could be? It’s getting frustrating because the yield monitor won’t map when it loses it because the Ag leader gets its signal from the topcon too. Thanks | |
|
Gleaner S78 losing GPS power
