AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Trimble 750 and ezsteer 500
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
neo_ag
Posted 10/17/2020 20:41 (#8550766 - in reply to #8550579)
Subject: RE: Trimble 750 and ezsteer 500



northeast ohio
+1. Connect the power supply to your vehicle battery and the anntnna to the display then power it up. If you have time to add the EZSteer then you can at least determine if the controller terrain compensation is functioning by just rotation the T2 box in your hand and watching stats on the info pop out tab. There are three options which it can be setup for RTK. 1) CenterPoint RTX satellite subscription, 2) a radio for communicating with a base station or 3) some type of dongle for connection to a VRS service such as Digifarm, AFS / PLM RTK or state / region CORS network. Unless it’s full setup, it won’t get a RTK fix but should show 8 or more satellites. Note that CFX 750’s can be RTK without GLONASS unlocked. If not Glonass unlocked it should work fine, but will cost you $700+ to unlock this extra range of satellites.

Resources you may want to have handy are
If unfamiliar with a CFX750, watch Jon Hofstetter’s YouTube video. Link to the first one. https://youtu.be/yGW1lgrnKxg
CFX 750 cabling guide http://trl.trimble.com/docushare/dsweb/Get/Document-507655/CFX_CG_9...

CFX 750 quick reference card http://trl.trimble.com/docushare/dsweb/Get/Document-505044/78838-00...
CFX 750 w/ EZSteer quick ref http://trl.trimble.com/docushare/dsweb/Get/Document-521574/94020-86...


Edited by neo_ag 10/18/2020 10:42
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)