Posted 10/9/2020 16:47 (#8537818 - in reply to #8537703) Subject: RE: Ontrac2+ Combine Settings
caseihfarmer - 10/9/2020 13:42
You say rtk but from what source? I used to feed an intrac2+ rtk from a trimble 750 and it would react poorly when the nmea strings were not set correctly, if I remember correctly baud rate was absolutely critical.
Its a 6500 ag leader and then cellular correction on the ntrip app. Buad rate is 19200 ..... it definitely doesn't work without the right baud rate