Near Intersection of I-35 & I-90 Southern Mn. | I should be able to figure it out with some daylight and a good nights sleep. The indicator light I had installed years ago was useful in thinking through the problem. I know that my motor, power to it and relay are good. The proximity sensor does not seem to be triggering the relay to run. This could be the sensor itself or other portions of the circuitry.
I noticed a 5 AMP fuse for it and will check that out. My plan is to physically remove the auger first so that when I feel around for the proximity switch I don't get hurt in case I'm able to trigger it to run. |