|
| I'm running a 630f head in beans on a 9660sts. When I lower the head of the right side touches the ground first, everything works good. The left side comes down and the header levels out fairly quickly. If the left side touches the ground first. It seems to take longer than it should for the head to level out and bring the right side down. It can also be kind of jerky bringing the right side down. Running the contour master manually everything works smoothly. It seems like the right side of the head likes to miss beans from cutting to high because it doesn't adjust fast enough or hold that side of the head close enough to the ground. Any suggestions? | |
|