AgTalk Home
AgTalk Home
Search Forums | Classifieds (119) | Skins | Language
You are logged in as a guest. ( logon | register )

ISO Harness Compatablity (JD and CIH)
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
raider2b
Posted 9/8/2020 06:37 (#8482260 - in reply to #8482139)
Subject: RE: ISO Harness Compatablity (JD and CIH)


North Dakota
The 2600 will not plug into the CNH 26 pin connector. They are both the same number of pins but are wired different and have a different key arrangement. The JD connector has 5 keys and the CNH has 3. Most tractors will only run one display on a canbus, Later versions of 700 software will allow you to number the displays, zero and one.

I believe AgExpress makes an adapter. Is the baler ISO? If it is you can simply plug it into the connector on the back of the tractor and it will show up on the 600/700 VT.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)