|
Soutwest Ks. | John: I typically am getting 1-4" accuracy measured between quess rows. Occasionally I will measure up 8" deviation, however that is not common. I have very flat terrain, pulling an 8 row strip till rig hooked behind an air cart caddy. I've had to do some careful measurement to get my implement offset correct and I'm not totally positive if it is also moving, however I doubt it with rigid, banded coulters. The real trick with this rig is to get this long rig turned around on the ends and lined up correctly. Just because the tractor is in the correct place doesn't mean the pull behind will be correct, at least for a few feet. | |
|