Posted 8/3/2020 16:41 (#8413176) Subject: Pp gen3 to Trimble 250 yield sense
central illinois
Could someone explain how I get Gps to the gen3 from a Trimble 250 with a ezsteer t2 box in combine? I plugged 4 pin out of t2 box but it’s not sending anything to the gen3 everything in the 250 is set correctly on nema screens ... guy on pp support told me I need Trimble cable Rev64045 is this correct? And does that cable replace the cable in t2’box or does it come out of 250?