Missouri | kgbarnett22 - 7/24/2020 17:39
Try running it as an In-line servo. We had a Miller 275 and that’s how it was setup even though it had a pwm controlled pump. The Inline servo just controlled the pump speed.
Also your threshold gpm seems really high. I think ours is like 8-10
Chalk me up as one more thinking the threshold is high. However, I would have guessed 2 or 3 as a proper range.
Regarding the original errors, I have always found them to be a power cabling issue. Not necessarily limited to ground, it can also be poor connection to power. There is actually a long list of similar, possible, gibberish errors. They all point to a power supply problem, or in one case I have experienced, a module which has sh!t the bed. |