|
Nwmo | I looked into the hypro estop a little and those valves are run off a canbus system that is daisy chained from valve to valve, Then the canbus controller receives the inputs from the spray control as far as section control. At that point i would assume the section size is a matter of software control based on the estop canbus controller and however many sections the rate controller is capable of controlling. The biggest hurdle is the cost savings isnt that great between this and a hawkeye system. If you stick with raven and go to a rcm you still only get 16 sections max vs agleader which i think allows up to 30 something but i dont really want to mix and match systems like that. | |
|