Posted 7/13/2020 21:58 (#8372249 - in reply to #8372087) Subject: RE: Macdon Flexdraper double float springs when running airbar.
Mid-Missouri
I had the same issue, in particular with the slow speed transport kit and dual knife and airbar. I am guessing you must have that?
What I did was remove the two large bolts (lower header fully on ground with adapter unlocked, be careful with springs) Fully remove both large spring bolts and cut a few more inches of thread on them. This allowed the original pair of springs to be tightened a little more. Works well and is nearly free.