|
South Texas | I have a John Deere 8520 exhaust manifold leaking I replaced the gasket one already but it blew out again. I was able to separate the two pieces and found that the back Half could not be machined so I had to buy a new one. The question I have is do I have to pull the head off to have it machined or is there a way I can get it trued up enough with the head on the tractor
Edited by GLTT 7/12/2020 11:16
(2FBFED70-8775-40DB-B5C0-81F319D0DC53 (full).jpeg)
(621609AF-4B9D-482A-9CF5-579AE26696AE (full).jpeg)
Attachments ---------------- 2FBFED70-8775-40DB-B5C0-81F319D0DC53 (full).jpeg (123KB - 17 downloads) 621609AF-4B9D-482A-9CF5-579AE26696AE (full).jpeg (137KB - 10 downloads)
| |
|