|
NW ILLINOIS | Farmers fix.
Remove carb bowl nut. Most have the jet in that
nut.
Catch the gas and ?? that comes out of the carb
bowl to see if you in fact have water in the gas.
Might be a little.
Take torch tip cleaner and find the size that is JUST
A LITTLE SMALLER.
Cut the end off the tip cleaner so the rough part of the
tip cleaner extends to the end.
Next run the tip cleaner in and out of the jet hole
LOTS of times.
Make sure the cross hole in the nut is clean using the
same tip cleaner.
Blow out holes with compressed air.
Engine will run better than ever.
I do this on many engines every year.
olf20 / Bob
Edited by olf20 7/10/2020 18:16
| |
|
Briggs 6.5hp and Pacer pump surging
