Viewing a thread - Insight won't power up, is the missing "power control relay" the problem?

Forums | Classifieds (56) | Skins | Language

You are logged in as a guest. ( logon | register )

Insight won't power up, is the missing "power control relay" the problem?	View previous thread :: View next thread
Forums List -> Precision Talk	Message format

pirlbeck

Posted 7/7/2020 06:58 (#8358792 - in reply to #8357469)
Subject: RE: Using the old Garmin

West Central Iowa

This antenna/receiver appears to have a factory installed 9 pin connector on it and it must be sending the power through this connector as there is no separate power feed wires. This 9 pin connector was plugged directly into the PF Advantage, so unless AgLeader changed the pin out from the PF to the Insight I think it should be plug and play.

Thanks Ted!

Insight won't power up, is the missing "power control relay" the problem? - pirlbeck : 7/5/2020 21:24
- RE: Insight won't power up, is the missing "power control relay" the problem? - caseihfarmer : 7/5/2020 21:32
  - RE: Insight won't power up, is the missing "power control relay" the problem? - pirlbeck : 7/5/2020 21:44
  - RE: Insight won't power up, is the missing "power control relay" the problem? - tedbear : 7/6/2020 07:03
    - RE: Insight won't power up, is the missing "power control relay" the problem? - pirlbeck : 7/6/2020 07:50
      - Using the old Garmin - tedbear : 7/6/2020 14:07
        
        RE: Using the old Garmin - pirlbeck : 7/7/2020 06:58
        
        RE: Using the old Garmin - tedbear : 7/7/2020 10:07
        
        RE: Using the old Garmin - pirlbeck : 7/8/2020 07:17
        
        RE: Using the old Garmin - tedbear : 7/9/2020 06:05
        
        RE: Using the old Garmin - pirlbeck : 7/10/2020 09:04
        
        RE: Using the old Garmin - tedbear : 7/10/2020 11:00
        
        RE: Using the old Garmin - pirlbeck : 7/10/2020 14:45

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)