AgTalk Home
AgTalk Home
Search Forums | Classifieds (127) | Skins | Language
You are logged in as a guest. ( logon | register )

What is Causing This?
View previous thread :: View next thread
   Forums List -> Crop TalkMessage format
 
Mark (EC,IN)
Posted 7/2/2020 12:36 (#8349704 - in reply to #8349595)
Subject: RE: What is Causing This?



Schlegel Farms, Hagerstown Indiana
HoRFarms - 7/2/2020 11:38

mai-ag - 7/2/2020 12:33

If your booms have caps on the end take them off and clean them


Yup. Its your filters or end caps. I did almost the exact cleanout as you plus a filter cleaning behind atrazine/laudis and burnt some beans. Realised i forgot to purge through the endcaps.

It wont do it while spraying because the water goes straight out the tip, but let it sit a bit and it dissolves that residue into whatever water is in the pipe on that section.


That could be it.

I don't have caps on the boom ends, there is an "L Fitting: that the nozzle attaches too. I did pull the tips off and let water run through, but I did not take the screens out and clean.

That could be the problem I have one screen before the pump, one after the pump before the manifold, and one on each boom.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)