Posted 6/25/2020 16:45 (#8335902 - in reply to #8335780) Subject: RE: Widening a Hagie STS
It's not too bad in theory, but adding into the cabling could be annoying, depending on what they're using. You'd need another two boom switches to go to the boom/speed node inputs, and you'd need two more outputs coming from the Accu-Boom or Product Controller node. I'm not sure which they used. Some of these pins might already be populated, depending on the cables installed. Reprogramming the Envizio Pro should be fairly straight-forward once you get that done.