AgTalk Home
AgTalk Home
Search Forums | Classifieds (119) | Skins | Language
You are logged in as a guest. ( logon | register )

connecting fmx750 to intelliview iii 3 (same as pro 300?)
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
Posted 6/25/2020 12:59 (#8335599 - in reply to #8334320)
Subject: RE: connecting fmx750 to intelliview iii 3 (same as pro 300?)

38400 is normally too high. You will normally be in the 9600-19200 range on those. Make sure your output port on the 750 is also set to port B. Also make sure you got the right cable from Ag Express. On the 12 pin that you plug into the 750 you should have wires in pins 3, 4 & 5. If you have a wire in pin 2 and not 4 it is the wrong cable and you will need to move it from 2 to 4. Also make sure you only have GGA and VTG turned on and that the gender changer just changes gender and doesn't reverse the pins.
Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)