|
Traverse City MI | We bought an 01 Spx 4260 last year and I has the raven envizo pro monitor in it. We have been un able to get the rate controller to control pressure at all. Its always 70+ psi. Adjusting the sparge pressure help but only slightly. I'm guessing the big grey valve underneath it what should be used to adjust the pressure. If you flip the switches at the loading station the valve will open and close but the raven does nothing. Once it opened when we tried to spray and then we couldn't build any pressure. We have spent quite a bit of time on the phone with Raven and the dealer and are getting nowhere. Can anybody tell me if they are using the can bus to control that valve or is it a raven harness? Does anybody have a copy of the wire diagram for that valve they could send me? It only has 2 wires going into but it gets lost pretty quick in the harness. | |
|
Case IH SPX 4260 and raven e-pro problem
