|
SW Ohio | Original bale command system on a 650 baler. I'm using net wrap and I'm having trouble with the net actuator extending. I've done some testing and its not getting 12v when the switch is moved to the extend position. Does not matter if I use the keys on the panel or the switch on the bottom of the monitor. I originally suspected the relays in the junction box, but I checked power there and its got power when in the correct position, but still the actuator does not operate. Works every time perfectly in retract, but extend is finicky. I can eventually get it to wrap if I move the switch enough times. Any ideas? | |
|