|
Sturgeon MO | I also got setup on autosteer this spring with an ontrac2+. I already had an Integra and 1600 receiver in my planter tractor and decided to buy a compass and 6000 receiver to put in my nh3 tractor so I didn't have so much stuff to switch back and forth. The compass/6000 steered great putting on gas. My first day planting with the Integra/1600 gave me some fits similar to yours as far as nudging quite a bit (still using markers to see if everything was working right). I switched the 1600 out for the 6000 and was much happier. After the first day of running markers(actually broke one), folded them up and only use them for the turnrows and if I know I'll be stopped for a while so I can get my line where it needs to be again after the infamous WASS drift. Before switching to the 6000, I had to turn my autoswath off around the turnrows around the trees because my 1600 would do some funky stuff the first pass or two, the 6000 does a much better job in my opinion. | |
|
Ag Leader GPS 1500 vs 6000
