|
NE Indiana | I recently installed an EZ Boom in a Miller sprayer replacing a Raven 460 and ran into similar issues. I ended up purchasing a Raven distribution cable to connect to the EZ boom and bypassed all of the OEM console wiring to the valves and flow meter. It was a bit of a pain but it works as it should now. I also ended up tying the 10 and 14 pins into the joystick switch to allow it to be used as the master switch instead of EZ boom master switch. You would need to do this to make your foot pedal work if desired.
Unfortunately the EZ boom is not a drop in replacement as Tedbear has stated but it is possible to use. | |
|