|
Pierce county WI | It's a pretty easy engine to overhaul, even if it spun a rod. If it spun a main, that's a tougher deal. A 466 combine engine should be really pretty cheap I'd bet $4000 or less. Switch the exhaust manifold, valve cover, oil pan and sump. And damper and pulley. If you really want to make her run, you could put a 50 series out of a Titan 2, or a 55 series out of a 9500. Then you are going to have to set up tach, and change the fuel pump to your old one, and switch drive hub. You would also need a different exhaust manifold and turbo plumbing. That's pretty good, over 12000 mechanical tach hours! | |
|
4440 Seized engine... reman vs overhaul
