Posted 5/19/2020 18:27 (#8267844 - in reply to #8267526) Subject: RE: row shut offs
You will need the large cinch harness on the rowflow module. As for a monitor harness on an SRM system you could use either #725499 (2020 harness with Power, Channel A, B, GPS) or #725439 (2020 harness with Power, GPS). 725439 is cheaper. Harness #729149 is the Gen2 SRM CAN harness which plugs into the 2020 and extends to the hitch. This harness has 2 connection points at hitch: 4 pin for SRM and 9 pin for rowflow. From hitch you'd need 9 pin extension harnesses to reach rowflow module. Rowflow and DeltaForce are compatible but certain products are not compatible with RowFlow on SRM systems.