Posted 4/9/2020 08:13 (#8175547 - in reply to #8174546) Subject: RE: Hydrlic cylinders not retracting all the way
East of Broken Bow
I have a 4800, and it does that when the cylinders go out of phase. Lift it all the way, and hold the lever in the raise position for a little while, and they will re-phase themselves. Mine does this when the operator doesn't raise it all the way at the ends of the field. If you just raise it halfway up, the wings will start to sag. If you lift it up all the way at every end, it seems to stay in phase.