AgTalk Home
AgTalk Home
Search Forums | Classifieds (3) | Skins | Language
You are logged in as a guest. ( logon | register )

Trimble 262 to Raven Smarttrax won’t connect, but will connect direct to viper
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Amc4life
Posted 4/8/2020 23:26 (#8175130 - in reply to #8174114)
Subject: RE: Trimble 262 to Raven Smarttrax won’t connect, but will connect direct to viper



Butterfield, MN
GGA, VTG, ZDA are the three you'd need, shut off RMC. I know you mentioned 19K earlier, but what baud is it finding GPS at in the com ports screen? I think the TM-1 is limited to nothing higher than 38,400, but the Viper can go all the way up to 115,200.

Do you have the system set up as 262 to TM-1, TM-1 to SmarTrax, SmarTrax to Viper? That's how it should be. Otherwise, SmarTrax 4.2 talks to the Viper at 115,200 baud, so that would prevent the TM-1 from receiving GPS, and it wouldn't work anyway, as the Viper wouldn't be able to talk back to the SmarTrax through the TM-1.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)