Mercer County, Ohio on the Indiana line | Trying to connect my RTK 262 to a smarttrax that is controlled by a viper pro.
I can plug my 262 into the viper and it shows a signal input and will spray using the on screen light bar. When I try to plug into the smarttrax node through the TM-1 (I’m on my second one now to see if that fixes it) I get a 3 red flash signal on the TM-1 that I’m not outputting signal from the 262.
Settings in the 262 are
I none 19k 8n1 O nmea 19k
I turned on GGA, VTG, ZDA NMEA is ASAP
Edited by Forty2366 4/8/2020 11:52
(image (full).jpg)
Attachments ---------------- image (full).jpg (226KB - 92 downloads)
|