|
Southeast Washington | Well that sucks on your own tractor. On the reaction arm bearing one of the plugs is magnetic of the two on the outside of the hub. Get above axle level and pull to see if all fines or some bigger chunks on the magnet. If any bigger pieces you know it is going downhil. Fines only probably has some life left. We had one show a little leakage that went on 4 years before bigger chunks showed up and the dealer would do anything on an 865C. If changing oil there is a plug on the inside also to drain.
Here for good air conditioning we have a valve on the heater hose to shut off for summer months and works well here for over 100 degree days but low humidity.
On our 765A tractor it had the Beeline steering system. When we put in a Trimble system I believe the steering valve was able to be used. On an 855A tractor it had no guidance system so no steering valve. Not familiar with the systems to tell you what it has and what it needs. | |
|
MT755B Challenger for Dependable horsepower?
