|
Central MN | Yes all three were green I think it's sensor diagnostic check, wheel motion sensor and planter lowered. Actually just figured it out the problem a little while ago. When I replaced the backbone harness from my 2008 planter, I didn't change out my 7 pin round wiring harness.... the one that runs lights/fold etc. Well come to find out I didn't have a ground going to complete the solenoid on the compressor with my new setup. Supposedly the 2012 and newer planters get their ground from the 7-pin. I thought mine would ground through the ISO bus harness but I was wrong!!! | |
|