Winkler, Manitoba Canada | rcfynrdt - 4/8/2020 20:47
I think whats going on is the valve on the planter doesn't allow oil to circulate when it shuts off dead heading the remote than opening releif valve on tractor. A solution is to turn down the flow on that remote that it only gives enough flow as necessary at your max planting speed. Than change your settings that the hydraulic drive runs all the time and relly on the clutches for turn off.
Allis 8000 has a load sensing hydraulic system. If a remote valve is dead headed, the pump should destroke at high pressure standby, not blow a relief valve. |
Need a Allis Chalmers 8000 series guro
