AgTalk Home
AgTalk Home
Search Forums | Classifieds (109) | Skins | Language
You are logged in as a guest. ( logon | register )

Integra slow turning sections on
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
pigfarmer82
Posted 4/2/2020 20:52 (#8159484)
Subject: Integra slow turning sections on


north central Ohio
Have an integra running a liquid product control module with a raven accuflow and 3 sections. Issue as stated is it is slow to turn on. Even with look ahead setting set at 5 seconds it will not change it turning on faster. Seems to turn off correctly. Part I find most confusing is in point rows coming back into them the first section that is susposed to come is delayed and then every section after that comes on as it should. So coming into a strait headland they are all delayed coming on. Don’t believe it is a delay in the fast close valve either as they don’t light up as being open and then waiting on flow. First year with this bar. Was previously on a JD controler. Have same setup on a 5 section sprayer and works very well. TIA Greg

Edited by pigfarmer82 4/2/2020 20:53
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)