|
| Trying to get trimble nav to output Rmc to a 20/20. Guidance is controlled with AgLeader Insight and Trimble 372. I can output Rmc fine from port B on 372 but this would not give me terrain compensated gps. If I try plugging into diagnostic connector on nav I can only get GGA, GSA and VTG. The Insight does not have a Rmc option under nmea output under the autopilot tab. I have tried turning Rmc on with the tap parameter through ap toolbox. Still does not work. I verified it is in fact turned on inside vehicle profile based on the fact the rmc output interval is set to 500 which should be 5hz. The 20/20 appears to be content without RMC. Everything is green but the box for rmc says 0hz. Has anyone had this issue or know of a solution? Will the 20/20 function without rmc? It’s running row flow and Air Force. The insight evidently triggers output from nav because when the insight is shut down all strings are lost on 20/20 even with nav and receiver still powered.
Edited by user452 4/1/2020 07:20
| |
|