Posted 3/31/2020 22:38 (#8155025 - in reply to #8153892) Subject: RE: Trouble with 8410T trimble autosteer install
If using Insight as display I would not use anything over version 6.0 on nav. Agexpress will tell you 5.23 I think. Either is fine for a Deere 8x10 track. Then I would use the external vehicle profile for one of those two versions. I can could email these if you do not have them. I would also pull all the connections between nav and steering box and check pins. Could have one bent or pushed out of socket just enough to cause a problem.