|
northeast ohio | We are setting up a FMX RTK with a Bluetooth device. On the GPS output page, what should the serial settings for the Max GGA Quality and Lat / Long be? On the second page is GGA the only checkbox to be turned on? This is on Port A with the 12 pin plugged into the port expander A. Corrections are coming in through Port C with AgRemote configured as shown in photo.
The only way I am getting output from the display to Bluetooth adapter on Port A is to put the pin in socket 4 rather than 3 of the 12 pin Deutsch. Port C is also in pin 4. It’s not outside to get enough satellites for a fix, but the display diagnostic show input (black text) into port C.
Edited by neo_ag 3/30/2020 20:58
 (18CAF3E6-476D-4A9F-87AB-9604C380ABB4 (full).jpeg)
 (2CAE792C-EF4F-4C3F-A70C-415F36ADD723 (full).jpeg)
 (E5FF3FDB-DBCD-4F60-A562-DF264F880F37 (full).jpeg)
 (88CD142F-9F00-4A28-8667-D473DB588932 (full).jpeg)
Attachments
----------------
 18CAF3E6-476D-4A9F-87AB-9604C380ABB4 (full).jpeg (103KB - 44 downloads)
2CAE792C-EF4F-4C3F-A70C-415F36ADD723 (full).jpeg (79KB - 52 downloads)
E5FF3FDB-DBCD-4F60-A562-DF264F880F37 (full).jpeg (84KB - 41 downloads)
88CD142F-9F00-4A28-8667-D473DB588932 (full).jpeg (98KB - 48 downloads)
| |
|
Fm1000 to beacon
