We have an extra IMD600 from converting an EZPilot to AMPD, so it’s moving to the tile plow which is transitioning from laser to an FMX with WMDrain controls. The IMD600 will be used now for slope adjusting of height and then pitch and height in the future (additional unlock and valve).
Question is, where is the appropriate location to mount an IMD600 on this plow? Thinking vertical on top of shank (photo 2) or on the parallel arm near antenna (photo 1). The parallel arm is offset by about 15” from center and it is already the mount location for an Agri-Drain visual slope gauge.