|
Woodham, Ontario | With ILS you will have no problem with 120" track on the front, running duals adds more stress. An Unverferth spacer would probably be better than an ILS dual spacer since those only use 6 bolts. I would remove all weight from the front though. At the back you will have to turn the whole cast wheelcenter around on the axle, the max you can attain without turning it around is 109". You can leave the 1400lbs wheelweights on the back wheels because they are not adding stress to the axle itself since they are right by the wheel and do not have a lever.
I run a 8120 at 108" for cutting hay, but I have the regualr MFWD axle. It just comes down to common sense, be careful, don't overload it.
(P1010010 (Medium).JPG)
(P1010011 (Medium).JPG)
Attachments ---------------- P1010010 (Medium).JPG (89KB - 116 downloads) P1010011 (Medium).JPG (119KB - 112 downloads)
| |
|