AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Data not transferring from 4640 to Op center
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
KDD
Posted 7/10/2019 22:48 (#7607962)
Subject: Data not transferring from 4640 to Op center



Leesburg, Ohio
Transferring field data from the 4640 screen that runs the planter to operations center via thumb drive.
Have problems with four fields out of about 40.
Two fields are totally missing. Two more only have part of the maps showing in op center.
Have tried twice since planting to down load to thumb drive and then upload to op center using Data Manager.
I know sometime there is a delay in processing in the "Deere Cloud", but I have given it several days after both attempts, and still no results on those four fields.
The data is present is the 4640 screen...we can see maps on the screen, but nothing in op center for those fields. The other fields are fine.
Any suggestions?
Thanks.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)