|
SW Kansas | I have a 500 controller with EZ steer in an old Apache that has worked great for years. This spring had to send the EZ steer motor only off to get repaired. Ever since it came back the sprayer would "crab" through the field, holding the line but within 6-8", (always was 3-4 before on WAAS) but constantly back and forth. I put up with it the first couple sprayings but it is getting worse to where it won't hold the line. Tried changing settings but nothing worked. Finally decided to do an update since it has been a few years, but when I put zip stick in, it won't start the update process, and yes I did unzip the files. Kinda lost here. Do I need to just send it in or am I missing something obvious? Thanks | |
|
Trimble EZ Guide 500 problems
