AgTalk Home
AgTalk Home
Search Forums | Classifieds (35) | Skins | Language
You are logged in as a guest. ( logon | register )

What’s needed to Pull double Ammonia tanks in spring?
View previous thread :: View next thread
   Forums List -> Crop TalkMessage format
 
1rjrdn
Posted 6/12/2019 19:17 (#7555543 - in reply to #7555502)
Subject: RE: What’s needed to Pull double Ammonia tanks in spring?


1586 - 6/12/2019 18:49

This was my bar I just sold this spring. Switched to liquid because of our fun springs. Really all it is would be a T where the hose goes to the breakaway. I had two breakaways, one on each side of the hitch. Welded the second mount on. Add on on a second long 20' hose and some bungee straps to hold it to the first tank. Best thing for preplant. No unhooking between tanks.




This is probably the most simple way to plumb for two tanks. You HAVE to have a breakaway for each tank and should have a back check on each side as well so if you break a hose it doesnt drain both tanks.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)