|
Wood Lake, MN | Haveing some type of electrical issue. Im just useing the 20/20 for monitoring. The pro 700 controls the planter. I have 2 smart connectors on the planter. Ill be planting then all of a sudden it says Im not planting even though the planter is planting. Checked for seed and it is planting. The load cells also go missing. Not sure if its a loose connection, pinched wire, cant see anything wrong. I did notice on smart connector 2 diagnose tab I have a caution symbol, but it doesn’t tell me what its for. Any ideas where and what to look for would appreciated.
Edited by jasonswmn 6/12/2019 15:05
 (87DF71AE-A842-4374-A0D4-12EE3ADE2A95 (full).jpeg)
 (615F7EA2-2961-4BC4-98A5-BE40CFF1C90D (full).jpeg)
 (22251634-CF42-4905-9B2A-7A0746B3DA05 (full).jpeg)
 (D32836AD-B2A1-4AC5-B9D7-58DB16642F5A (full).jpeg)
 (A42082C6-D1EC-433C-A1F9-4DE18EDF1C08 (full).jpeg)
Attachments
----------------
 87DF71AE-A842-4374-A0D4-12EE3ADE2A95 (full).jpeg (137KB - 105 downloads)
615F7EA2-2961-4BC4-98A5-BE40CFF1C90D (full).jpeg (161KB - 100 downloads)
22251634-CF42-4905-9B2A-7A0746B3DA05 (full).jpeg (143KB - 103 downloads)
D32836AD-B2A1-4AC5-B9D7-58DB16642F5A (full).jpeg (173KB - 101 downloads)
A42082C6-D1EC-433C-A1F9-4DE18EDF1C08 (full).jpeg (141KB - 98 downloads)
| |
|
Gen 3 20/20 issues
