Posted 6/7/2019 21:22 (#7547064) Subject: Spra Coupe auto boom control problems
I'm using Ag Leader to control my auto boom on my 3640 spra coupe. 3 sections on a 60 foot boom. When a section shuts off according to the screen, the flow rate compensates for only 2 sections but the section does not shut off. Same for if 2 sections are supposed to be shut off, the rate goes down to enough for 1 section but all three are still on. When all sections are to be shut off they all shut off as they are supposed to.
Thought it was wiring harness issue and changed that out but still the same response.
What should i be looking for? Something wrong with the Ag Leader?
Thanks for any insights or experiences that could help.