|
SE NE | Pulled the baler out of the shed for the first time this spring and this error code came up and will not go away. The manual says its the bale size sensor that is either not working or the wire is bad.
The sensor is located up at the top right side of the baler. We have tore the wire cluster apart and the wire is good all the way to the monitor. We got the sensor to work and signal that the bale is full sized when the sensor is activated but the error code still won't go away. Is it possible the code is for another sensor than the bale size one? any help is greatly appreciated as we have alfalfa down that is needing to be put up.
Edited by Roh96 6/1/2019 17:27
 (20190601_170945 (full).jpg)
 (20190601_164447 (full).jpg)
 (20190601_164449 (full).jpg)
Attachments
----------------
 20190601_170945 (full).jpg (159KB - 191 downloads)
20190601_164447 (full).jpg (164KB - 146 downloads)
20190601_164449 (full).jpg (152KB - 156 downloads)
| |
|
JD 568 Megawide Baler error code
